Authored by Ed Davidson with Long Foundation Drilling Co. and originally published on Linkedin.
Yep...
There ya have it folks...
Catching yourself in the middle of a line of fire predicament is a slippery situation that just may land you smack-dab in the middle of incident and or injury.
The term “line of fire” is very common when talking about the hazards of a work task. Depending on the work being completed, there may be many different lines of fire or there could be very few. It is important to understand what the line of fire is and how to avoid being in it to avoid injuries.
A simple definition of line of fire is being in harm’s way. Line of fire injuries occur when the path of a moving object or the release of hazardous energy intersects with an individual’s body.
Three major categories of line of fire incidents are caught-in or between incidents, struck-by incidents, and released energy incidents. There are many specific examples of hazards for each of these categories. A few quick examples for each category:
Caught-in or between- A construction worker is standing between a wall and an excavator. When the excavator spins around the counterweight pins the worker against the wall. Another example would be a worker placing his hand too close to a rotating gear and gets it pulled into the gear.
Struck-by- A pedestrian struck by a moving vehicle or an object falling from a higher level striking a worker below are examples of struck-by incidents.
Released energy- A pipe releasing hot steam from a valve that is being removed or a flame shooting out of a malfunctioning engine are examples of released energy.
Avoiding Line of Fire Incidents
The best way to avoid the mentioned incident types is to eliminate the related hazards whenever possible. By totally eliminating the hazards, there is no chance that you or anyone else in the work area can be injured by that hazard.
When elimination is not possible, engineering controls are the next best choice in protecting yourself from injury. Some engineering controls that could protect you from line of fire incidents include physical barriers, guarding around moving parts, and toe boards on elevated work platforms to prevent objects from falling to the area below.
There are many other possible engineering controls that could be used depending on the specific hazard.
Total elimination of hazards is not always possible, and engineering controls may not be feasible, or they can fail. Because of this reality, it is important to decrease your chance of being a victim of line of fire injuries by not putting yourself in harm’s way in the first place.
Understand the work tasks that are going on around you and the associated hazards. Ask yourself what is the worst that can happen or what will happen if a certain safeguard fails. Recognize the hazards of your work and act accordingly.
